Port Operation List; Preset List (Port Operation Pane) - HP StorageWorks XP12000 User Manual

When selected, displays ports designated as host target ports (used for host connect).
• RCU Target
When selected, displays ports designated as an RCU target (receiving) port (used for Continuous
Access XP, TrueCopy for z/OS, Continuous Access XP Journal, Universal Replicator for z/OS, and so
on).
• Port number
Displays ports assigned to each port attribute in the branch below each port attribute. External
Storage XP uses ports set to external.

Port Operation list

Displays ports in the local array that External Storage XP can use or set. The port information displayed
corresponds to the item selected in the Port tree.
You can sort the list by attribute. For example, to sort by port numbers, click Port on the list.
Rows corresponding to ports that are about to be acted upon appear in the Preset list, and the
corresponding row in the Port Operation list appears in blue italics.
Figure 38

Port Operation list

• Port
Port number.
• Attribute
Port attribute. External ports are used for connecting to the external array.
• PCB Mode
Port's PCB mode. External ports do not have High Speed mode.
• FLI_TOV (Fabric Login Timeout Value)
Maximum time allowed (in seconds) for an external array to perform a fabric login after being
connected to a switch. This value is preset and cannot be changed.
• PLI_TOV (Port Login Timeout Value)
Maximum time allowed (in seconds) for the external array to perform a port login after being
connected. This value is preset and cannot be changed.
• Margin
The sum of the FLI_TOV and PLI_TOV values.

Preset list (Port Operation pane)

This list displays rows from the Port Operation list that are about to be acted on. Check the contents of the
Preset list before applying them to the local array. Contents displayed in the Preset list appear in blue
italics in the Port Operation list. When you click Apply in the Port Operation pane, actions designated in
the Preset list are applied to the local array and the contents of the Preset list disappear.
If you click Cancel in the Port Operation pane, all designated actions in the Preset list are canceled.
If settings in the Preset list contain errors, actions are not applied to the local array even if you click Apply.
In that case, error messages appear, incorrect settings appear in the Preset list, and error codes appear in
the Preset list.
When you right-click a setting in the Preset list, the following commands appear:
• Detail
66 External Storage XP panes