Tuner Operations; Setting The Am Tuner Interval Spacing; Tuning In To Stations Manually; Using Preset Tuning - JVC XV-NK58SL Instructions Manual

RX-ES1SL

Tuner operations

The buttons on the remote control are mainly used for tuner
operations. To use buttons on the remote control, press
FM/AM before operation.
When operating this receiver using the remote control,
always set the mode selector to AUDIO/TV/VCR/DBS.
HOME CINEMA CONTROL CENTER
OPEN/CLOSE
KARAOKE
AUDIO/TV
/VCR/DBS
DVD VCR
DVD VCR
DVD MULTI FM/AM
TV VOL CHANNEL
TUNING FM MODE
MEMORY
TOP MENU
ENTER
CHOICE
ECHO
AUDIO
SUBTITLE
KARAOKE SOUND
ZOOM 1
PROGRESSIVE
VFP 4
KARAOKE
7
KEY TV RETURN
ANGLE 10
KEY VOCAL
REPEAT 3D
DIMMER SLEEP

Setting the AM tuner interval spacing

Some countries space AM stations 9 kHz apart, and other countries
use 10 kHz spacing. 9 kHz interval spacing is the initial setting.
• Be sure the receiver is turned off, but is plugged into an AC outlet
when setting the AM tuner interval.
DIMMER SETTING ADJUST SURROUND
DVD MULTI DVD
STANDBY / ON STANDBY
On the front panel ONLY:
To select the 10 kHz interval:
Hold down ADJUST and press STANDBY/ON
To change back to the 9 kHz interval:
Hold down SETTING and press STANDBY/ON
24
AUDIO
DVD
DBS TV
DBS TV
TV/VIDEO MUTING
VOLUME
TUNING
MENU
ON
SCREEN
RESERVE
RETURN
TITLE/GROUP
BASS TREBLE
2 3
BASS TREBLE
5 6
8 9
100 +
0 +10
EFFECT
ANALOG/DIGITAL CANCEL
INPUT
SOURCE SELECTOR MASTER VOLUME
/ MULTI JOG
SET / TUNER PRESET
DBS VCR TV FM / AM
.

Tuning in to stations manually

From the remote control ONLY:
1
Press FM/AM to select the band.
The last received station of the selected band is tuned in.
• Each time you press the button, the band alternates between
FM and AM.
ANALOG L R
SUBWFR
You can also select "FM" or "AM" by turning SOURCE SELECTOR
on the front panel.
2
Press repeatedly or hold TUNING 9 or
TUNING ( until you find the frequency you
want.
If you select "FM" or "AM" using SOURCE SELECTOR on the
front panel, press FM/AM on the remote control before this
operation.
• Pressing (or holding) TUNING 9 increases the frequency.
• Pressing (or holding) TUNING ( decreases the frequency.
NOTES
• When you hold and release TUNING 9 or TUNING (, the
frequency keeps changing until a station is tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the ST (Stereo) indicator
also lights up.

Using preset tuning

Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
PHONES
canceled before you finish, start from step 2 again.
From the remote control ONLY:
1
Tune in to the station you want to preset (see
"Tuning in to stations manually" above).
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See "Selecting the FM
reception mode" on page 25.
.
ANALOG L R
SUBWFR
2
Press MEMORY.
The channel number position starts flashing on the display for
about 5 seconds.
ANALOG L R
SUBWFR
TUNED ST AUTO MUTING
MH
Z
VOL
TUNED ST AUTO MUTING
MH
Z
VOL
TUNED ST AUTO MUTING
MH
Z
VOL