Basic Settings; Operating Procedure; Setting The Digital Input (Digital In) Terminals-Digital In - JVC XV-NK58SL Instructions Manual

Basic settings

Operating procedure

DIMMER SETTING ADJUST SURROUND
DVD MULTI DVD
STANDBY / ON STANDBY
On the front panel ONLY:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press SETTING.
MULTI JOG now works for the setting operation.
2
Turn MULTI JOG until the setting item you want
to set appears on the display, then press SET.
• As you turn MULTI JOG, the indication changes as follows:
ANALOG L R
SUBWFR
SUBWFR FRNT SP
CNTR DL
SURR SP
LFE
CROSS
DIGITAL IN* AUTO SR
DBS VIDEO QUICK SETUP
(Back to the beginning)
* Setting item you can select appears on the display after
"DIGITAL IN" appears for a few seconds.
3
Turn MULTI JOG to select the appropriate setting
for the item selected in step 2 , then press SET.
Your setting is stored.
ANALOG L R
SUBWFR
Ex.: When selecting "1DVD2DBS3TV" for "DIGITAL IN".
SOURCE SELECTOR MASTER VOLUME
/ MULTI JOG
SET / TUNER PRESET
DBS VCR TV FM / AM
VOL
CNTR SP
SURR DL
D.COMP
DVD VIDEO
VOL
Setting the digital input (DIGITAL IN)
terminals—DIGITAL IN
When you use the digital input terminals, register what components
PHONES
are connected to which terminals—DIGITAL 1/2/3 (see page 10) so
that the correct source name will appear when you select the digital
source.
1DVD2DBS3TV* : Select when connecting the following
components;
DIGITAL 1:DVD player
DIGITAL 2:DBS tuner
DIGITAL 3:TV tuner
1DVD2TV3DBS : Select when connecting the following
components;
DIGITAL 1:DVD player
DIGITAL 2:TV tuner
DIGITAL 3:DBS tuner
1DBS2DVD3TV : Select when connecting the following
components;
DIGITAL 1:DBS tuner
DIGITAL 2:DVD player
DIGITAL 3:TV tuner
1DBS2TV3DVD : Select when connecting the following
components;
DIGITAL 1:DBS tuner
DIGITAL 2:TV tuner
DIGITAL 3:DVD player
1TV2DVD3DBS : Select when connecting the following
components;
DIGITAL 1:TV tuner
DIGITAL 2:DVD player
DIGITAL 3:DBS tuner
1TV2DBS3DVD : Select when connecting the following
components;
DIGITAL 1:TV tuner
DIGITAL 2:DBS tuner
DIGITAL 3:DVD player
* Initial setting
CONTINUED ON THE NEXT PAGE
19