To Use The Remote Control Unit For Catv Converter Or Satellite Tuner Operation - JVC XV-501BK Instructions Manual

Getting started
M anufacturer's code list
No. M anufacturer
01 GI JERROLD
02 GI JERROLD
03 GI JERROLD
04 GI JERROLD
05 GI JERROLD
06 GI JERROLD
07 GI JERROLD
08 GI JERROLD
09 SCIENTIFIC ATRANTA
10 SCIENTIFIC ATRANTA
11 ZENITH
12 ZENITH
13 PIONEER
14 PIONEER
15 HAM LIN/ REGAL
16 HAM LIN/ REGAL
17 HAM LIN/ REGAL
18 HAM LIN/ REGAL
19 OAK/ SIGM A
20 OAK/ SIGM A
21 OAK/ SIGM A
22 TOCOM
23 TOCOM
24 RCA/ PANASONIC
25 RCA/ PANASONIC
26 RCA/ PANASONIC
27 RCA(SAT)
28 SONY(SAT)
24
Downloaded from: https://www.usersmanualguide.com/
To use the remote control unit for CATV converter or
satellite tuner operation
You can operate the CATV converter or satellite tuner w ith the rem ote control
unit. To operate them , you have to change the rem ote control signal. Also refer
to the m anual supplied w ith them .
Changing the remote control signal
1 TV
Set on the rem ote control unit to CATV.
DVD CATV
CATV/SAT
2
Press and hold POWER , then press
Do not release . Keep holding
CATV/SAT
POWER
CATV/SAT
3
POWER
Holding , enter the m anufacturer's code (tw o digits) using
See the lists on the right to find the m anufacturer's code.
4
CATV/SAT
Release .
POWER
The follow ing buttons can be used for operating the CATV converter or
satellite tuner (w ith
DVD
Turns the CATV converter or satellite tuner on or off.
CATV/SAT
POWER
+
Changes the channels.
CH
–
0 9
to Selects the TV channels.
5
Try to operate he CATV converter or satellite tuner by pressing
If the CATV converter or satellite tuner turns on or off, you have entered the
correct code.
NOTE
If there is more than one code listed for your brand of he CATV converter or
satellite tuner, try each one until the correct one is entered.
.
SET
CATV/SAT
until the next step is com pleted.
POWER
TV
set to CATV):
CATV
0 9
to .
CATV/SAT
.
POWER