Connecting The Power Cord - JVC XV-NK58SL Instructions Manual

Getting started
Digital connection
DIGITAL 3
(TV)
DIGITAL IN
DIGITAL 2 (DBS)
DIGITAL 3 CENTER SURROUND
DBS IN MONITOR OUT DIGITAL 1
SPEAKER SPEAKERS
(TV) (DVD)
VIDEO
Y RIGHT
DVD DBS VCR
OUT IN
IN IN
(REC) (PLAY)
VIDEO
DIGITAL IN
DIGITAL 2 (DBS)
P B
MONITOR OUT
CAUTION:
SPEAKER
IMPEDANCE
P R SUBWOOFER
8 ~ 16
OUT
ONENT VIDEO S-VIDEO
Before connecting
a digital optical
cord, unplug the
protective plug.

Connecting the power cord

When all the audio/video connections have been made, connect the AC power plug to the wall outlet. Make sure that the plugs are inserted
firmly. The STANDBY lamp on the receiver and indicator on the DVD player light in red.
• Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference.
NOTES
• The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:
– when you unplug the power cord.
– when a power failure occurs.
• Disconnect the power cord:
– if you are not going to use the player for a long period of time.
– before cleaning the player.
– before moving the player.
CAUTIONS:
• Do not touch the power cord with wet hands.
• Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other accidents.
• If the cord is damaged, consult a dealer and have the power cord replaced with a new one.
• Do not plug in before setting the voltage selector switch on the rear of the receiver and all connection procedures are completed.
12
Digital optical cord (not supplied)
DIGITAL 1
(DVD)
Digital coaxial cord
(supplied: 1 cable)
FRONT
SPEAKERS
LEFT RIGHT LEFT
RX-ES1SL
OPTICAL
DIGITAL OUT
COAXIAL
DIGITAL OUT
NOTES
• When shipped from the factory, the DIGITAL IN terminals have
been set for use with the following components:
– DIGITAL 1 (coaxial): For DVD player
– DIGITAL 2 (optical): For DBS tuner
– DIGITAL 3 (optical): For TV tuner
If you connect other components, change the digital input (DIGITAL
IN) terminal setting correctly. See "Setting the digital input (DIGITAL
IN) terminals—DIGITAL IN" on page 20.
• Select the correct digital input mode.
See "Selecting the analog or digital input mode" on page 13.
TV
DBS tuner