Kohler 4EOZ Service page 82

Camshaft
1. Release the snap ring that holds the camshaft in
the gear cover.
2. Using a driver, press out the camshaft.
Figure 10-46.
Figure 10-46 Camshaft
Camshaft Gear
1. Remove the gear from the camshaft using a puller
or by pressing it off from the shaft.
Figure 10-47.
Figure 10-47 Camshaft
70 Section 10 Generator and Engine Disassembly/Reassembly
Camshaft Bearing
1. Remove the camshaft's ball bearing from inside of
the gear cover by using a socket pushed with a
hydraulic press. See Figure 10-48.
See
Figure 10-48 Camshaft Bearing
See
TP-6137 5/03