Bagging The Clippings - Toro 22155 Operator's Manual

1. Top of rear-discharge plug lever in switch channel

Bagging the Clippings

Use the grass bag when you want to collect grass and leaf
clippings from the lawn.
If the side-discharge chute is on the machine,
remove it and lock the side-discharge door; refer to
Removing the Side-discharge Chute (page 15) before bagging
the clippings.
WARNING
A worn grass bag could allow small stones and
other similar debris to be thrown in the operator's or
bystander's direction and result in serious personal
injury or death to the operator or bystanders.
Check the grass bag frequently. If it is damaged,
install a new Toro replacement bag.
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
Installing the Grass Bag
1. Remove the rear-discharge plug (Figure 26).
Figure 25
2. Insert the grass bag handle into the grooves at the top
of the machine.
Important: The machine has a safety switch that
prevents you from starting the machine unless you
first install the grass bag securely on the machine.
Removing the Grass Bag
1. Lift the grass bag handle out from the grooves at the
top of the machine and remove the bag from the
machine (Figure 27).
2. Insert the rear-discharge plug (Figure 28).
14
Figure 26
Figure 27