Product Overview - Toro 22155 Operator's Manual

Figure 11
2. Squeeze the button on the lever with your thumb and
fully insert the rear-discharge plug into the opening
(Figure 11).
3. Release the button on the lever and ensure that the top
of the lever is lies fully in the switch channel. If the
top of the lever is not in the switch channel, your
machine will not start!
Note: If the lever does not latch properly, disconnect
the wire from the spark plug and check for and remove
any debris buildup in the tunnel.

Product Overview

1. Blade-control bar
2. Self-propel-drive bar
3. Handle
4. Fuel tank
5. Cutting-height lever (4)
1. Grass bag
2. Side-discharge chute
9
Figure 12
6. Air filter
7. Spark plug
8. Oil fill/dipstick (not shown)
9. Starter handle
Figure 13
3. Rear-discharge plug
(installed)