Controls; Operation; Checking The Engine Oil Level - Toro 22155 Operator's Manual

Controls

Figure 14
1. Recoil-start handle
2. Blade-control bar
3. Self-propel-drive bar

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.

Checking the Engine Oil Level

Service Interval: Before each use or daily
1. Remove the dipstick, wipe it clean, and insert it into the
oil filler neck, but do not screw it in (Figure 15).
2. Remove the dipstick and check the oil level (Figure 15).
If there is no oil on the dipstick, slowly pour oil into
the oil fill tube, periodically checking the level with the
dipstick, until the dipstick indicates that the engine is
full as illustrated in Figure 15. Do not overfill. (Max.
fill: 20 oz. (0.55 l), type: SAE 30W detergent oil with
an API service classification of SH, SJ, SL, or higher.)
Note: Max. fill: 20 oz. (0.55 l), type: SAE 30W
detergent oil with an API service classification of SH,
SJ, SL, or higher.
Note: If you overfill the engine, pour some oil out of
it; refer to Changing the Engine Oil (page 18).
3. Install the dipstick securely.
10
Figure 15