Side-discharging the Clippings
Use the side-discharge chute for cutting very tall grass.
If the bag is on the machine, remove it
and insert the rear-discharge plug; refer to
Removing the Grass Bag (page 14) before side-discharging
the clippings.
refer to Recycling the Clippings (page 13).
Installing the Side-discharge Chute
1. Unlock the side-discharge door (Figure 29).
2. Lift open the side-discharge door (Figure 30).
Figure 29
3. Install the side-discharge chute and close the door onto
the chute (Figure 31).
Removing the Side-discharge Chute
To remove the side-discharge chute, reverse the steps above.
Important: Lock the side-discharge door after you close
it (Figure 32).
15
Figure 32