Interface Switches - Epson DS-560 User Manual

DS-560 User's Guide
Button
y Stop Button
] Start Button
You can customize the Start button using Document Capture Pro/Document Capture.
"Document Capture Pro (Windows)/Document Capture (Mac OS X)" on page 43
&

Interface Switches

These switches are used to change the connection interface and the wireless connection setup.
a. connection mode switch
b. Connect button
Parts
Connection mode switch
Connect button
Note:
❏ Make sure the connection mode switch is set to the correct position before you start scanning.
❏ Do not move the connection mode switch when the product is operating. If you move the switch, scanning will be
canceled.
❏ If you move the connection mode switch when the product is on, turn off the scanner, set the connection mode switch to
the correct position, and then turn the scanner back on.
"Problems Indicated by status light" on page 60
&
Getting to Know Your Product
Cancels scanning.
Starts scanning.
Change the connection interface.
USB Set to USB when connecting with a USB cable.
AP mode Set to AP mode when connecting using a direct Wi-Fi connection (access
point mode). See Network Guide for more details.
Wi-Fi Set to Wi-Fi when connecting using Wi-Fi infrastructure mode. See
Network Guide for more details.
Use this when setting up a wireless connection. See Network Guide for more details on wireless
setup.
Function
Function
15