Scanning Over A Network; Scanning From The Network Interface Unit (For Windows) - Epson DS-560 User Manual

DS-560 User's Guide
F
In the Epson Scan Settings window, click Test to check the connection. If everything works properly, a message
indicating successful connection is displayed.
G
Click OK to save the settings.

Scanning Over a Network

Note:
You must set the IP address for your Network Interface Unit before using it.
"Setting Up Client Computers with Epson Scan Settings" on page 39
&
A
Turn on your scanner, Network Interface Unit and the client computer.
Turn on your scanner and the client computer.
B
Load the document(s).
C
Start Document Capture Pro/Document Capture.
"Document Capture Pro (Windows)/Document Capture (Mac OS X)" on page 43
&
D
Click (Scan) icon on the Document Capture Pro/Document Capture Main window.
E
Make necessary settings on Main Settings, and then click Scan.
Scanning from the Network Interface Unit (for
Windows)
Setup a Job in advance.
"Assigning a Specified Scanning Setting to a Program" on page 33
&
A
Turn on your scanner, Network Interface Unit and the client computer.
B
Load the document(s).
C
Press the OK button on the Network Interface Unit.
The scanner searches for an available computer.
D
Select the computer you want to send the data to, and then press the OK button.
If a group is set for the scanner, you need to set the same group on the computer if you want to display it on the
panel.
Using the Network Interface Unit
41