Program Status Bar - Kenwood Rapid-Bake BM300 series Instructions/Recipe Book

Program Status Bar

The indicator lights above the relevant symbol will light up to show what stage of the
cycle the breadmaker has reached.
Pre-heat Knead Rise Bake Keep warm
Pre – heat
The pre-heat feature only operates at the start of the Wholewheat & and jam
settings. During the pre-heat stage the ingredients is warmed for 15minutes on the Jam,
5minutes on the wholemeal rapid and 30minutes on the wholemeal settings before the
first kneading stage begins. There is no kneader action during this period.
Knead
The dough is either in the 1st or 2nd knead stage or being knocked back between the
& ¸
rising cycles. During the last 10minutes of the 2nd knead cycle on settings –
an alert will sound to tell you to add any additional ingredients manually.
Rise
The dough is in either the 1st, 2nd or 3rd rising cycle.
and ¹ the
During the last 5minutes of the 3rd rising cycle on setting , , , –
time can be extended by up to 20minutes (see page 9).
Bake
The loaf is in the final baking cycle.
, µ and ¹ the time can be
During the last 5minutes of the baking cycle on setting –
extended by up to 20minutes (see page 9). For crisper loaves remove the bread
immediately after the baking cycle is complete.
Keep Warm
, µ & ¹ the breadmaker will automatically go into
When using programs – , ,
the Keep Warm mode at the end of the baking cycle. It will stay on the keep warm mode
for up to 1 hour or until the machine is turned off, which ever is soonest.
Please note: the heating element will switch on and off and will glow intermittently
during the keep warm cycle.
8