Table of Contents
Advertisement
TRAVEL SYSTEM - INTEGRAL LATCH
D. Then lower the foot end of the Infant Carrier until it rests on the seating surface of
the stroller.
E. Fold the Infant Carrier handle down if
required, then check the Infant Carrier is
securely fixed to the stroller before use.
F. Refer to the Stroller instruction book for
other instructions.
REMOVING THE INFANT CARRIER FROM THE
STROLLER
A. Fold the Infant Carrier handle up to the carry position and grip firmly in one hand.
B. Raise the Infant Carrier release catch located on the rear of the Infant Carrier.
C. Lift the Infant Carrier clear of the stroller.
ENSURE THE BABY IS SECURED IN THE INFANT CARRIER WITH THE HARNESS
AT ALL TIMES. THE INFANT CARRIER IS FITTED WITH A CANOPY WHICH CAN BE
USED WHEN THE CARRIER IS CONNECTED TO THE STROLLER. THE CANOPY CAN
ALSO BE USED IN THE CAR.
46
Stroller seating surface
TRAVEL SYSTEM - BRITAX ADAPTORS
ALTERNATE BRITAX
STROLLER ADAPTOR
METHOD - HOW TO FIT
To attach the Britax Stroller Adaptor to the
Carrier ensure the Carrier's Handle is in
Rocking position and trim is placed aside
to align the holes.
A. Align attachment to hole, Click into position.
B. Place Locking Pin into hole and align.
Press Pin
Left hand
Right hand
Locking Pin
Adaptor
Adaptor
A
Push in under handle
Push in Locking Pin
B
47
Advertisement
Table of Contents
