Table of Contents
Advertisement
TRAVEL SYSTEM - INTEGRAL LATCH
INSTALLATION INSTRUCTIONS PREPARING THE
INFANT CARRIER - LATCH METHOD
A. Remove Infant Carrier with the Baby from the Base by loosening the upper
anchorage strap and disengaging the upper restraint strap from the guides on the
back of the Infant Carrier.
B. Rotate handle into carry position then lift the release catch with the other hand.
C. With the release catch depressed lift the Infant Carrier.
D. When Infant Carrier clears the base hooks, raise Infant Carrier further and remove
from the car.
PREPARING THE STROLLER
A. Ensure the Stroller has been assembled correctly before fitting the Infant Carrier.
B. Open the Stroller, apply the brakes and lower the backrest to the fully reclined
position.
C. Remove the arm bar cover and store in the basket pocket.
44
Arm Bar cover removed
TRAVEL SYSTEM - INTEGRAL LATCH
INSTALLING THE INFANT CARRIER INTO THE
STROLLER - LATCH METHOD
A. Ensure that the arm bar (or tray) is fully locked in position on both sides of the
armrests.
B. Position the Infant Carrier over the Stroller with the baby's head end of the Infant
Carrier over the Stroller arm bar (or tray).
C. Lower the Infant Carrier and ensure that it locates onto the Arm Bar or tray and the
latches engage.
Latch
Arm Bar
Arm Bar
Latch
Tray
45
Advertisement
Table of Contents
