Table of Contents
Advertisement
HOW TO USE
B. Move the two harness tongues
to the outer extents of the infant
carrier, into the Buckle Tongue
Holders.
Move the harness buckle
towards the Harness Adjuster.
C. Place baby into Infant Carrier lying on its back so that
the buckle is between the baby's legs. Ensure that baby's
arms and legs are free. Make sure baby is dressed to
allow the Harness Buckle to be pulled up between baby's
legs e.g. a jump suit.
Never wrap the baby in a blanket
before placing in the Infant Carrier, fit the blanket after the
harness is fitted.
NOTE:
1. Discontinue using the Padded Insert if the Pad causes
over heating, discomfort or you need more room for
baby to grow.
2. Correct fitment of the harness is very important as it
restrains the baby in the Infant Carrier. The harness
must fit firmly around upper torso of the baby and be
positioned so as to leave the baby's arms and legs free.
3. This Infant Carrier needs to be used until the baby
reaches the shoulder height marker. It is acceptable for
the legs to be bent to fit.
26
Buckle Tongue Holder
SECURING BABY IN INFANT CARRIER
A. Place each arm through each shoulder
strap of the harness. Position the buckle of
the crotch strap as shown right.
B. Fit either harness tongue into the Harness buckle
followed by the other tongue until a click is heard. If the
second tongue does not engage - press the red button
and re-insert the tongues. Check secure engagement by
pulling harness straps.
Tongue
CAUTION:
The end of the harness adjustment
strap is connected to the cover to avoid
tripping over the end. Ensure the harness
adjustment strap hook is attached when
carrying the carrier (see page 28).
HOW TO USE
Buckle
Click
27
Advertisement
Table of Contents
