Indoor Use; Using The Battery Holder - JVC GR-DVM5 Instructions Manual

12
EN

Indoor Use

When using the camcorder indoors, you can use the AC Charger Station (provided) instead of a battery.
Remove.
1 CONNECT DC CORD TO CAMCORDER
Insert the coupler of the provided DC cord into
the camcorder.
2
CONNECT DC CORD TO AC
CHARGER STATION
Connect the DC cord to the AC Charger Station's
DC OUT jack.

Using The Battery Holder

For extended use, prepare the Battery Holder (included in the optional Battery Holder Kit VU-V615KITU), which
can be loaded with one battery pack. This Battery Holder can be used together with the battery installed in the
camcorder.
Camcorder
connector
Camcorder lock lever
(with release button)
Battery lock switch
DC cord
Coupler
Core filter
Nub
Mark
Battery
GETTING STARTED
Power lamp
When power is
Slide down the
supplied, the
open switch.
power lamp lights.
To DC
OUT
jack
3 SUPPLY POWER TO AC CHARGER
STATION
Plug the AC Charger Station's power cord into an
AC outlet.
NOTE:
Since the AC Charger Station processes electricity
internally, it becomes warm during use. Be sure to use
it only in well-ventilated areas.
1 INSERT CHARGED BATTERY
To insert a battery pack, slide the battery lock
switch to the release position and insert the
battery
from falling out, be sure to slide the battery lock
switch to the lock position.
2
ATTACH TO CAMCORDER
Insert the Battery Holder's nub into the mounting
socket on the bottom of the camcorder and slide
the camcorder lock lever to the lock position.
• To detach the camcorder, press the release
button on the lock lever and slide the lock lever
to the release position. Then slide the battery
lock switch to the release position.
NOTES:
When the battery remaining power indicator appears
as , that means the battery power is close to nil.
When the battery power is exhausted, power turns
off automatically.
Each time you start shooting, the camcorder chooses
the battery pack that has more remaining power, and
uses that as the power supply. That means both
battery packs will be exhausted at roughly the same
time.
To AC outlet
Power cord
AC Charger
Station AA-V60U
end first. To prevent the battery pack
(Cont.)