JVC GR-DVM5 Instructions Manual page 30

30
EN
Snapshot
Use your camcorder like a regular camera and take a snapshot, or several of them in succession.
Select Dial
PHOTO
During snapshot
1 SELECT OPERATION MODE
First turn the Power Dial to " " while pressing
down the lock button located on the dial.
Make sure the viewfinder is pulled out or the
LCD monitor is open fully.
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3 ACCESS SYSTEM MENU
Move the pointer and highlight bar to "TO
SYSTEM MENU" by rotating the Select Dial.
Press it and the System Menu appears.
SNAPSHOT button
RECORDING
Display
REC MODE SP
WIDE MODE OFF
ZOOM 40X
DIS ON
GAIN UP AGC
TO DATE / TIME MENU
4 TO SYSTEM MENU
END
Recording Menu
4 SELECT SNAPSHOT MODE
Move the pointer and highlight bar to "PHOTO
MODE" by rotating the Select Dial. Press it and
choose the appropriate mode among the five
Snapshot modes (
when the one you want is displayed and press
it again. The pointer and highlight bar
automatically move to "RETURN". Press the
Select Dial twice. Selection is complete and
the menu disappears.
5 TAKE SNAPSHOT
Press the SNAPSHOT Button.
If you press during Record-Standby . . .
.... "PHOTO" appears and a still image will be
If you press during Recording . . .
.... "PHOTO" appears and a still image will be
Advanced Features (Cont.)
Lock button
Power Dial
MENU button
PHOTO MODE
SCENE
BEEP / TALLY
WIND CUT
SOUND MODE
ID NUMBER
DEMO. MODE
4
RETURN
System Menu
pg. 31) by rotating it. Stop
recorded for approx. 6 seconds, then the
camcorder re-enters the Record-Standby
mode.
recorded for approx. 6 seconds, then the
normal recording resumes.
FRAME
5S
ON
OFF
32kHz
06
OFF