Remote Control Unit - JVC GR-DVM5 Instructions Manual

18
EN

Remote Control Unit

You can use the RM-V712U to control the camcorder. When using the remote control, be sure to point it at
the remote sensor. The transmitted beam effective area for indoor use is approx. 5 m. The transmitted beam
may not be effective or may cause incorrect operation if the remote sensor is directly exposed to sunlight or
powerful lighting.
PAUSE IN connector (
Zoom Buttons (
DISPLAY Button
(
SHIFT Button (
SLOW Rewind/Forward
Buttons (
Left/Right Buttons
( pg. 52)
FADE/WIPE Button
( pg. 65)
EFFECT Button
(
EFFECT ON/OFF Button
( pg. 53)
Knob
START/STOP Button (
pg. 52)
pg. 62)
pg. 52)
pg. 51)
pg. 53)
R.A. EDIT Buttons (
GETTING STARTED
pg. 65)
T W
pg. 65 – 67)
Installing The Battery
The RM-V712U uses one lithium battery (CR2025).
1 PULL OUT BATTERY HOLDER
Pull out in the direction of the arrow while
pressing the knob as shown.
2 INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to
have the "+" mark visible.
3
RE-INSERT HOLDER
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
(
pg. 21)
AUDIO MONITOR Button
( pg. 55)
MBR SET Button (
Down Button (
Up Button (
Operation Buttons
( pg. 52, 62)
pg. 2).
(Cont.)
pg. 64)
pg. 52)
pg. 52)