JVC GR-DVM5 Instructions Manual page 59

To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time, Time Code
.... set to "ON" or "OFF" in the Playback Menu
( pg. 54).
• Playback Sound Mode Display
.... set the Power Dial to " ", press the MENU
button, and set "ON SCREEN" in the Date/
Time Menu (
Then set the Power Dial back to "PLAY".
Charging The Camcorder Battery Pack
If you attach the camcorder with the battery installed to the AC Charger Station, you can charge the
battery pack. After doing steps 1 and 2 on pg. 58, plug the AC Charger Station's power cord into an AC
outlet. The AC Charger Station's CAMERA charger indicator starts blinking to indicate that charging has
begun. When it stops blinking but stays on, charging is complete. The charging time for one BN-V607U
battery pack is approx. 90 minutes.
Charging Two Battery Packs
If two battery packs are attached to the AC Charger Station (one attached to the AC Charger Station and
one in the camcorder attached to it), they will be charged in the order that they were attached.
The charging time for two BN-V607U battery packs is approx. 180 minutes.
NOTES:
To charge the battery pack installed in the camcorder, be sure to switch off the camcorder first. If it
is not switched off, charging will not begin.
The charging time for a BN-V615U battery pack is approx. 180 minutes.
pg. 13) to "ON" or "OFF".
NOTES:
Never touch the connector on the bottom of
the camcorder or on the AC Charger Station. If
the pins are damaged, the connectors will
become unusable due to contact failure.
Never connect any cable other than the provided
cable to the AC Charger Station's VIDEO and
AUDIO OUT connectors.
When using the provided VIDEO/AUDIO cable or
S-VIDEO cable, make sure you connect the end
of the cable with the core filter to the AC Charger
Station. The core filter improves performance of
equipment.
If TV/VCR is equipped with only one audio
connector, use a conversion plug (commercially
available).
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
To keep the camcorder's display from appearing
on the TV screen during playback, press the IND.
ON/OFF button for longer than 1 second.
59
EN