JVC GR-DVM5 Instructions Manual page 58

58
EN
VCR/TV Connection (using AC Charger Station)
Please refer to your VCR and/or TV instruction manual(s) when connecting.
Mark
To S-VIDEO
OUT connector
1 CONFIRM POWER-OFF STATUS
Make sure the camcorder's power is off.
2 ATTACH AND LOCKS
Align the mark on the camcorder with the one
on the AC Charger Station and slide the
camcorder to the AC Charger Station in the
direction of the arrow. Slide the lock lever on
the AC Charger Station in the direction of the
arrow until it clicks. The camcorder and the
AC Charger Station are now securely attached.
• When removing the camcorder, press the
Release button and slide the lock lever in the
opposite direction of the arrow and detach
the camcorder in the opposite direction of
the arrow.
• The AC Charger Station cannot function
using the camcorder's battery pack.
Core
filter
S-VIDEO cable (provided)
Yellow to VIDEO
White to AUDIO L
Core filter
Red to AUDIO R
PLAYBACK
Power cord
Power lamp
CAMERA
charger
indicator
Lock!
Red to AUDIO R
VIDEO/AUDIO
cable (provided)
White to AUDIO L
Yellow to VIDEO
Connect when the S-VIDEO
cable is not used
3 CONNECT AC CHARGER STATION
TO TV OR VCR
Connect as shown in the illustration above and
plug the AC Charger Station's power cord into
an AC outlet.
If Using A VCR . . . go to step 4.
If not . . . go to step 5.
4 CONNECT VCR OUTPUT TO TV
INPUT
Refer to your VCR's instruction manual.
5
TURN ON POWER
Turn the Power Dial to "PLAY" while pressing
down the lock button located on the dial and
turn on the TV/VCR.
6 SELECT TV'S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
Basic Connections (Cont.)
To AC outlet
TV
To S-VIDEO IN
connector
To
TV or
VCR
To VIDEO/AUDIO
IN connectors
VCR