Pro-Form PFEL85907.0 User Manual page 6

1.
To make assembly easier, read the
information on page 5 before you begin
assembling the elliptical exerciser.
Pull the ramp handle outward and lower the
Ramp (104) until it rests on the Frame (1).
Attach a Wheel (50) to the front of the Frame
(1) with an M10 x 41mm Shoulder Screw (63).
Attach the other Wheel (50) in the same way.
2. Identify the Right Frame Cover (49), which is
marked with an "R" sticker. Then, orient the
Right Frame Cover with the rounded side in the
indicated location. While another person lifts the
rear of the Frame (1), attach the Right Frame
Cover with two M4 x 16mm Screws (84).
Repeat this step for the Left Frame
Cover (48).
1
104
2
Rounded
Side
48
6
Ramp
Handle
1
50
63
Rounded
Side
1
49
84