Set Up The Npb-40 - Nellcor Oximax NPB-40 Operator's Manual

Set up the NPB-40

WARNING: Do not use an NPB-40, O
cables that appear damaged.
WARNING: Do not lift the NPB-40 by the sensor or
extension cable because the cable could disconnect
from the NPB-40 and the NPB-40 may drop on the
patient.
WARNING: The NPB-40 is not defibrillator-proof.
However, it may remain attached to the patient
throughout defibrillation or while an electrosurgical
unit is in use, but the measurements may be
inaccurate throughout the defibrillation and shortly
thereafter.
WARNING: Use only the Nellcor extension cable
DEC-4 with the NPB-40. Do not attach any cable that
is intended for computer use to the O
port. Do not connect any device other than a
Nellcor-approved O
sensor connector.
26
M
XI AX
M
XI AX
M sensor to the O
XI AX XI
sensor, or
sensor
M
AX