2000 Expedition/Navigator Workshop Manual
All cylinder heads
5. Remove the special tools on both ends of the cylinder head.
6. NOTE: Lubricate the hydraulic lash adjusters with clean engine oil.
Install the hydraulic lash adjusters in their original locations.
RH cylinder head
7. Install the RH exhaust manifold gaskets and the exhaust manifold. Tighten the nuts in the sequence shown.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYJ/~MUS~LEN/21/S...
Page 4 of 20
1/19/2011