2000 Expedition/Navigator Workshop Manual
56. Roughly position the engine control sensor wiring harness and mount it on the valve cover studs.
57. Connect the knock sensor electrical connector.
58. Connect the RH radio frequency interference capacitor electrical connector.
59. Connect the CMP sensor electrical connector.
60. Connect the LH radio frequency interference capacitor and CHT sensor electrical connectors.
61. NOTE: LH shown, RH similar.
Install the cylinder block drain plugs.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYJ/~MUS~LEN/21/S...
Page 17 of 20
1/19/2011