2
instAllAtion
AG-1590-A-09-08
2.1
locAtion
–
Rear wall clearance not required.
For corner installation lateral clearance of 107 mm is required.
For free-standing installation the optional rear panel has
to be installed.
–
Level machine by turning the feet.
–
Distribute machine weight equally onto all feet.
2.2
conVERtinG to coRnER opERAtion
Depending on direction of operation, the guide rails may need to be
adjusted to suit the direction of operation (see arrows).
–
Unscrew the guide rail in front.
–
Refit guide rail at right angle according to the direction of operation.
dE
GB
F
nl
5