Operation; Preparation; Run - Hobart AM900 Installation And Operation Instructions Manual

6

opERAtion

AG-1590-A-09-08
6.1

pREpARAtion

– Check correct position of rack guide, wash/rinse arms and strainers.
open shut-off valve.
–
switch on main switch or put the plug in.
–
– Check level of detergent and rinse aid containers.
– Close hood and push the on/oFF button
– The on/oFF button flashes green during fill and heating cycle. This
process can take several minutes.
When the button changes to green steady burning light, machine is
ready for operation.
– Place glasses and cups face downwards into the rack.
– Remove any food debris before loading plates into rack.
– Spray off greasy food soil.
6.2

Run

– Put rack into the machine and close the hood.
The on/oFF button
As soon as the on/oFF button changes to steady green light, the
–
wash cycle is finished.
– Open the hood and take out rack.
Allow dishes to dry for 1 minute approx.
➀ , tank will be filled.
➀ flashes green, wash cycle is running.
dE
GB
F
nl
11