USE AND MAINTENANCE MANUAL CHAP.1 INTRODUCTION The warnings contained in this manual provide important information for safely installing, using and servicing this machine. The operator is required to read this manual before starting operation involving handling, installation, use, maintenance or disassembly of the machine. This manual must be kept intact and in a safe place for frequent consultation.
USE AND MAINTENANCE MANUAL ELECTRICAL CONNECTION 1. Connection to the power supply must be made with a main switch (H) it must be omnipolar and interrupt all contacts including neutral. There must be a distance of at least 3 mm between open contacts, and it must have a thermal magnetic safety switch or fuses which are able to withstand the maximum power indicated on the plate.
USE AND MAINTENANCE MANUAL Specification From French degrees Hardness German degrees 7’5 °dH English degrees °e Parts per million Residual Minerals Maximum 300/400 mg/l DRAIN CONNECTION Gravity for all models, except EH70, so the drain needs to be situated below the base of the machine. Model EH70 requires a stand-pipe The drain pipe needs to be connected to a drain- trap built into the floor.
The above amounts are for water with a hardness of 5-10°F (French degrees). Models EH60/70 and CHH50 are equiped with detergent dispenser Regulations: A trimmer (A) allows to determine the «ON-OFF» time and consequently the amount of detergent required.
USE AND MAINTENANCE MANUAL This machine is only to be used for the purpose for which it was designed. Any other use is considered improper and dangerous. The machine is not to be used by untrained personnel. Never use the machine if any of the protections (microswitches, panels or other) provided by the manufacturer are missing.
USE AND MAINTENANCE MANUAL Chap. 4 USE OF MACHINE DESCRIPTION OF THE COMMANDS To turn the machine on, press the button indicated left/right (the corresponding warning light will light 2. When the light turns off, the machine is ready to use. Short cycle 3.
USE AND MAINTENANCE MANUAL 4.1.1 Automatic water drainage (optional) Press button indicated left/right and select the drainage programme (the corresponding warning light will light up). Press button indicated left/right machine will automatically drain the water out of the machine. USING THE MACHINE Pour the proper amount of detergent in the wash tank according to the producer’s instructions.
USE AND MAINTENANCE MANUAL WE RECOMMEND TO PRE-CLEAN the glassware in order to minimize maintenance. The quality of final wash results will be greatly improved by first removing food particles, lemon peels, toothpicks, olive pits, etc. which could partially clog the pump filter and impair washing efficiency.
USE AND MAINTENANCE MANUAL CHAP. 5 MAINTENANCE GENERAL RULES The machine are designed to reduce maintenance requirements. It is necessary to observe the following rules to make the machine last long, and work without problems. In any case, it is necessary to observe the following rules to make the machine stay in perfect working order: keep the machine clean and in good condition avoid making temporary or urgent repairs frequently...
USE AND MAINTENANCE MANUAL Grease steel surfaces with vaseline oil whenever the appliance will be inactive for a long period of time. Have an expert drain all the water out from the boiler and the wash pump to avoid the danger of ice formation. If the machine does not operate properly or in case of trouble, call a service center authorized by the manufacturer of the appliance or by his Dealer.
Page 14
CHH50 CHH60 CHH70 Dishwasher Spare Parts List jw-06-2006...
Page 15
CHH50 - EH60 - EH70 Machine Body Electrical components Components in the tank Wash pump...
Page 23
23/09/03 Product Modification Note , from today’s date we have done the following modification: Codes subject to the modification RV82HUK (hobart u.k.) Modification ‘s Description For all hood type models , We have exchanged the current pump cod. 139321-472 built by LGB , with the wash pump Code 80115 built by FIR.
Page 24
Wash Pump EH70 (Modification - 23.09.03) 80124 80123 80122 80121 80120 80119 80118 80115 (Fir) Wash Pump Assy Modification from 23.09.2003 (see att Note)
Page 29
EH60 / CHH50 SIMBOLO DESCRIZIONI DESCRIPTIONS BESCHREIBUNGEN A1/43 SCHEDA CONTROLLO ELETTRONICA FICHE DE CONTROLEELECTRONIQUE ELECTRONIC CONTROL UNIT ELEKTRONISCHE BEDIENUNGSKARTE PANNELLO COMANDI TABLEAU DE COMMANDES CONTROL PANEL BEDIENUNGSPANEEL SONDA RESISTENZA VASCA THERMOSTAT RESISTENCE DE CUVE PROBE TANK HEATER THANKHEIZUNGTHERMOSTAT SONDA RESISTENZA BOILER...
Page 31
SIMBOLO DESCRIZIONI DESCRIPTIONS BESCHREIBUNGEN EH 70 A1/43 SCHEDA CONTROLLO ELETTRONICA FICHE DE CONTROLEELECTRONIQUE ELECTRONIC CONTROL UNIT ELEKTRONISCHE BEDIENUNGSKARTE PANNELLO COMANDI TABLEAU DE COMMANDES CONTROL PANEL BEDIENUNGSPANEEL SONDA RESISTENZA VASCA THERMOSTAT RESISTENCE DE CUVE PROBE TANK HEATER THANKHEIZUNGTHERMOSTAT SONDA RESISTENZA BOILER THERMOSTAT RESISTANCE BOYLER BOOSTER HEATER THERMOSTAT BOILERHEIZUNG -THERMOSTAT...
Page 35
Hobart Independent Southgate Way, Orton Southgate, Peterborough PE2 6GN Tel: 0870 1688881 Fax: 01733 361347 E-mail: indsales@hobartindependent.com Website: www.hobartindependent.com As continued product improvement is a policy of HOBART / HOBART INDEPENDENT, specifications are subject to change without notice.