Url Blocking - Edimax BR-6215NRg User Manual

Parameters
Client PC Description
Client PC IP Addresses
Client PC Service
Protocol
Port Range
Apply Changes
Reset
Click <Apply Changes> at the bottom of the screen to save the above configurations. You can now configure other
advance sections or start using the router (with the advance settings in place)
Example: Access Control
In the example below, LAN client A can only access websites that use Port 80. However, LAN client B is able to access
websites and any other service that uses ports between 80 and 999.

2.7.2 URL Blocking

You can block access to some Web sites from particular PCs by entering a full URL address or just keyword of the Web
site.
The description for this client PC rule.
Enter the IP address range that you wish to apply this Access Control rule. This is the
user's IP address (es) that you wish to setup an Access Control rule.
Note: You need to give your LAN PC clients a fixed/static IP address for the Access
Control rule to work properly.
You can block the clients from accessing some Internet services by checking the services
you want to block.
This allows you to select UDP, TCP or both protocol types you want to block.
It can be assign up to five port ranges. The router will block clients from accessing
Internet services that use these ports.
Click "Apply Changes" to save the setting.
Click "Reset" to clear all fields.
Description
49