Password Settings; Remote Management - Edimax BR-6215NRg User Manual

Time Server Address
Daylight Savings
Times From
Times to
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)

2.1.2 Password Settings

You can change the password required to log into the broadband router's system web-based management. By default,
there is no password. So please assign a password to the Administrator as soon as possible, and store it in a safe place.
Passwords can contain 0 to 12 alphanumeric characters, and are case sensitive.
Parameters
Current Password
New Password
Confirmed Password
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)

2.1.3 Remote Management

The remote management function allows you to designate a host in the Internet the ability to configure the Broadband
router from a remote site. Enter the designated host IP Address in the Host IP Address field.
The router default the "Time Server Address" is "192.43.244.18"
The router can also take Daylight savings into account. If you wish to use this function,
you must check/tick the enable box to enable your daylight saving configuration
(below).
Select the period in which you wish to start daylight Savings Time
Select the period in which you wish to end daylight Savings Time
Enter your current password for the remote management administrator to login to your
Broadband router.
Note: By default there is NO password
Enter your new password
Enter your new password again for verification purposes
Note: If you forget your password, you'll have to reset the router to the factory default
(No password) with the reset button (see router's back panel)
Description
21