Edimax BR-6215NRg User Manual page 28

Parameters
LAN IP
IP address
IP Subnet Mask 255.255.255.0
802.1d Spanning Tree
DHCP Server
Lease Time
IP Address Pool
Domain Name
Default
－
This is the router's LAN port IP address (Your LAN clients default
192.168.2.1
gateway IP address)
Specify a Subnet Mask for your LAN segment
If 802.1d Spanning Tree function is enabled, this router will use the
Disabled spanning tree protocol to prevent from network loop happened in
the LAN ports.
You can enable or disable the DHCP server. By enabling the DHCP
server the router will automatically give your LAN clients an IP
address. If the DHCP is not enabled then you'll have to manually
Enabled
set your LAN client's IP addresses; make sure the LAN Client is in
the same subnet as this broadband router if you want the router to
be your LAN client's default gateway
The DHCP when enabled will temporarily give your LAN clients an
IP address. In the Lease Time setting you can specify the time
Forver period that the DHCP lends an IP address to your LAN clients. The
DHCP will change your LAN client's IP address when this time
threshold period is reached
You can select a particular IP address range for your DHCP server
to issue IP addresses to your LAN Clients.
Note: By default the IP range is from: Start IP 192.168.2.100 to End
－
IP 192.168.2.200. If you want your PC to have a static/fixed IP
address then you'll have to choose an IP address outside this IP
address Pool.
－
You can specify a Domain Name for your LAN.
27
Description