Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Edimax BR-6288ACL
Summary of Contents for Edimax BR-6288ACL
- Page 1 BR-6288ACL Quick Installation Guide 09-2014 / v1.0...
-
Page 2: Package Contents
Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): BR-6288ACL CD-ROM RJ-45 Splitter Cable Quick Installation Guide Power Adapter USB Cable... -
Page 3: Installation
Installation Plug in the BR-6288ACL using the included power adapter and/or USB cable. The BR-6288ACL requires 1 A of current – please ensure that your USB port can provide sufficient power. If not, use the 5V DC adapter. Wait until the circular LED at the base of the product is flashing "... - Page 4 Wi-Fi device is set to use a dynamic IP address. This is a simple procedure and step-by-step instructions to do this on a computer can be found in the user manual. Choose if you want to use your BR-6288ACL in its default Wi-Fi router mode or in a different mode.
-
Page 5: Wisp Mode
The BR-6288ACL’s five available modes are outlined below: Wi-Fi Router Mode The device connects to your modem and provides 2.4GHz and/or 5GHz Internet (wireless and Ethernet) access for your network devices. Access Point Mode The device connects to an existing router via Ethernet cable and provides 2.4GHz and/or 5GHz... - Page 6 RJ-45 Splitter cable The BR-6288ACL includes an RJ-45 splitter cable in the package contents. This plugs into the “Network” port of the BR-6288ACL and splits the port into two separate Ethernet ports – providing two ports instead of one, as shown below.
-
Page 7: Browser Based Configuration Interface
Wi-Fi Power Switch After setup you can use the Wi-Fi power switch to adjust the strength of the BR-6288ACL’s wireless radio if you wish. Normal mode uses full 100% wireless power while green mode uses 25% wireless power. Browser Based Configuration Interface After setup you can access the browser based configuration interface to configure or change the settings of the BR-6288ACL. -
Page 8: Led Status
Resetting to factory default status or Wi-Fi Flashing (Fast) Protected Setup (WPS) is active. Light Green Internet is connected and Wi-Fi is full power. Internet is connected and Wi-Fi is in green Dark Green mode (25% power). BR-6288ACL is off. -
Page 9: Troubleshooting
BR-6288ACL. If you are too far away from your existing router, then it is difficult for the BR-6288ACL to receive a wireless signal. -
Page 10: Federal Communication Commission Interference Statement
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 11: Eu Declaration Of Conformity
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2009/125/EC. Cet équipement est conforme aux exigences essentielles et autres dispositions de la Français: directive 1999/5/CE, 2009/125/CE. Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními Čeština: směrnic 1999/5/ES, 2009/125/ES. -
Page 12: Declaration Of Conformity
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: AC600 Multi-Function Concurrent Dual-Band Wi-Fi Router Model No.: BR-6288ACL The following European standards for essential requirements have been followed:... - Page 13 Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
- Page 14 intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
- Page 15 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’...