Fixed-Ip Xdsl - Edimax BR-6215NRg User Manual

Parameters
Host Name
MAC Address
Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for
the Cable Modem connection. You can start using the router now, if you wish to use some of the advance features
supported by this router see chapter 2, 3, 4.

1.2 Fixed-IP xDSL

Select Static-IP xDSL if your ISP has given you a specific IP address for you to use. Your ISP should provide all the
information required in this section.
Parameters
IP address
Subnet Mask
Gateway address
If your ISP requires a Host Name, type in the host name provided by your ISP, otherwise
leave it blank if your ISP does not require a Host Name.
Your ISP may require a particular MAC address in order for you to connect to the Internet.
This MAC address is the PC's MAC address that your ISP had originally connected your
Internet connection to. Type in this MAC address in this section or use the "Clone MAC
Address" button to replace the WAN MAC address with the MAC address of that PC
(you have to be using that PC for the Clone MAC Address button to work). To find out the
PC's MAC address see Appendix A. (see Glossary for an explanation on MAC address)
This is the IP address that your ISP has given you.
Enter the Subnet Mask provided by your ISP (e.g. 255.255.255.0)
This is the ISP's IP address gateway
Description
Description
12