User Set-Up Menu; Alternating Course Knob Icon - Simrad AP26 Manual

The display on the active control unit will first show a
and then the icon will alternate with the mode index.
The "locked" control units in the system will show:
The "Lock function is disengaged by one of the following
actions:
• The active control unit unlocks the other ones and makes them
• The system is switched OFF by any control unit (press STBY

2.19 User Set-up Menu

In the AP26 and AP27, all modes except NFU and FU have a
complemental User Set-up menu. You can easily access the set-
up menu by a quick double press on the NAV/WIND/SETUP
button.
Quick double press
to access

Alternating Course Knob Icon

When the course knob is used in the User Set-up menu, an icon
will alternate with the mode index to tell that no course changes
can be made unless you press the mode button.
The user set-up menu times out 30 seconds after the last
operation in the menu.
20222147A
"inactive" by another double press on the STBY button. It
also displays the
state.
for 2-3 seconds).
Scroll through the menu
icon before it returns to the normal active
Use the course knob to
change a value or a setting
Operation
icon
41