Zigzag-Turns - Simrad AP26 Manual

Zigzag-turns

A zigzag turn pattern is also available when in AUTO mode.
The user decides whether the first turn should be made to Port or
Starboard.
Ensure that the zigzag-turn pattern has been selected under the
User Set-up menu. Refer to Turn Pattern select on page 45.
To enter zigzag turn mode:
Press of the TURN/DODGE/INFO button repeatedly until
ZIGZAG is flashing in the display.
Boat turning starboard
To exit zigzag-turn mode, press any of the mode buttons. When
pressing the AUTO button, the new set course is shown in the
upper portion of the display.
20222147A
The course change can be set before the turn is
initiated.
The autopilot will continue on the set course until you
press either the PORT or STBD button to select the
direction in which to make the first course change. If
you do not press PORT or STBD within 1 minute, the
autopilot will return to AUTO mode and stay on
course.
While sailing in a zigzag pattern you can alter the
course change, time on the leg, and the set course. An
arrow shows the direction of the next course change.
Course change 20°
Course change 40°
Operation
Course
Time on leg
27