User Set-Up Menu; Alternating Course Knob Icon; Standby Mode - Simrad AP16 User Manual

Simrad AP16 Autopilot
The "locked" control units in the system will show:
The "Lock function is disengaged by one of the following
actions:
2.17

User Set-up Menu

In the AP16, all modes except NFU have a complemental
User Set-up menu. You can easily access the set-up menu
by a quick double press on the INFO/SETUP button.
INFO
SE INFO
SETUP
Quick double press
to access

Alternating Course Knob Icon

When the PORT 10 and STBD 10 buttons are used in the
User Set-up menu, an icon will alternate with the mode
index to tell that no course changes can be made unless you
press the mode button.
The user set-up menu times out 30 seconds after the last
operation in the menu.

STANDBY Mode

Backlight
26
− The active control unit unlocks the other ones and makes
them "inactive" by another double press on the STBY
button. It also displays the
normal active state.
− The system is switched OFF by any control unit (press
STBY for 2-3 seconds).
1
Scroll through the menu
icon before it returns to the
1
Change a value or
10 10
setting
20222121A