User Set-Up Menu; Alternating Course Knob Icon; Standby Mode - Simrad AP27 Manual

2.22 User Set-up Menu

In the AP26 and AP27, all modes except NFU and FU have a
complemental User Set-up menu. You can easily access the set-
up menu by a quick double press on the NAV/WIND/SETUP
button.
Quick double press
to access

Alternating Course Knob Icon

When the course knob is used in the User Set-up menu, an icon
will alternate with the mode index to tell that no course changes
can be made unless you press the mode button.
The user set-up menu times out 30 seconds after the last
operation in the menu.

STANDBY Mode

Backlight
Contrast
20221586B
Scroll through the menu
The backlight of the display and buttons may be
adjusted to 10 levels (10 = brightest). The setting is
stored when the system is turned off. Adjustment is
local to the control unit you adjust or synchronized
with other units in the Simrad Group (page 110).
The contrast of the display may be adjusted to 10
levels (10 = highest contrast). The setting is stored
when the system is turned off.
Adjustment is local to the control unit you adjust. At
high temperatures, not all levels are available due to
automatic temperature compensation.
Installation
Use the course knob to
change a value or a setting
39