Language Selection; Interface Settings; Display Units - Simrad AP26 Manual

Language selection

To access the language selection in the Installation Menu,
confirm "Yes" by turning the course knob clockwise
The autopilot can present the display text in eight different
languages:
English, Deutsch, Francais, Espanol, Italiano, Nederlands,
Svenska and Norsk.
4.4

Interface Settings

Sets the format of the clock/data output for radars connected to
the Autopilot Computer.
4.5

Display units

20222147A
Turn the course knob to select the language you
wish to use.
Continue to next item in the menu by pressing
the STBD button, or leave the menu by pressing
the STBY button.
Step to the Interface part of the
Installation Menu.
Turn the course knob clockwise
to access the Interface Setup
items.
Use the course knob to select the
connected type of radar.
Select Display units by pressing
STBD button and confirm by
rotating the course knob clock-
wise. This screen gives access to
the display unit set-up of the Wind
Speed, Sea temperature and
Depth. The setup is local to each
control unit.
Configuration and Setup
75