Rep 7 Left Cover - Xerox WORKCENTRE PE 220 Service Manual

REP 7 Left Cover

1. Before you remove the Left Cover, you
should remove:
- Front Cover (Refer to
- Rear Cover (Refer to
2. Remove the screw securing the Left
Cover.
Figure 1
Workcentre PE 220
REP 3)
REP 5)
3. Apply light pressure to the back of the Left
Cover and pull it to the left side in the
direction of the arrow.
4. Unplug the Speaker Connector from the
Main PBA.
5. If necessary, remove the two screws
securing the Speaker.
11/05
Repairs/Adjustments
Figure 2
Figure 3
4-7