Repairs/Adjustments
3. To remove the Rear cover, make sure the
right Power Switch does not get jammed
to the Rear Cover.
Figure 3
4. If necessary, remove the Jam Cover in
the direction of arrow.
Figure 4
4-6
REP 6 Right Cover
1. Before you remove the Right Cover, you
should remove:
- Front Cover (Refer to
- Rear Cover (Refer to
2. Remove the screw securing the Right
Cover.
3. Apply light pressure to the back of the
Right Cover and pull it to the right side in
the direction of the arrow.
11/05
REP
3)
REP
5)
Figure 1
Figure 2
Workcentre PE 220