Setup - Recording Mode - Clover CDR 0440 Instruction Manual

NAME
COVERT
BRIGHTNESS
CONTRAST
HUE
SATURATION
2-3. Setup – Recording Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
RECORD icon and press SEL button to enter the setup menu item. Navigate through the menu items using
the control button (
). To return to setup menu screen, press the ESC button.
Menu item
RESOLUTION
CHANNEL
Set the channel name. Press SEL button and set the channel name and select
OK using the control button (
Enable/disable display of the video channel in live display mode.
Change the brightness value of the specified channel.(0-100)
Change the contrast value of the specified channel. (0-100)
Change the hue value of the specified channel. (0-100)
Change the saturation value of the specified channel. (0-100)
) and change the value of the menu item using the control button (
Figure 2.3.1. Recording mode setup screen
Table 2.3.1. Menu items in Recording mode setup
Set the resolution to either 704x480, 704x240, or 352x240 for
NTSC. (For PAL: 704*576/ 704*288/ 352*288)
Select a channel for applying the following settings using the control
button (
channels at once. Once you select an item, then press SEL to set value
).
Description
). Press SEL button to change the setting value of all
24