Clover CDR 0440 Instruction Manual page 23

Figure 2.2.1. Display mode setup screen
Table 2.2.1. Menu items in DISPLAY mode setup
Item Description
OSD Enable/disable on-screen-display.
Select ON and press SEL button, then user are able to control OSD display
bar up or down using the control button ( ).
SEQUENCE Enable/disable sequential display of video in full screen mode.
Set the dwell time of each, quad or 9 channels display in sequential display
SEQ-DWELL TIME
mode.(1-60seconds)
OSD CONTRAST Set the visibility level of the On Screen Display (OSD).(20-100)
CHANNEL Select a channel for applying the following settings using the control button
( ). Press SEL button to change the setting value of all channels at
once. Once you select an item, then press SEL to set value for all channels.
(DISPLAY, BRIGHTNESS,CONTRAST,HUE,SATURATION)
23