Setup - Storage Mode - Clover CDR 0440 Instruction Manual

2-5. Setup – Storage Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
STORAGE icon and press SEL button to enter the setup menu item. Navigate through the menu items using
the control button (
). To return to setup menu screen, press the ESC button.
Item
OVERWRITE
DISK FORMAT
Figure 2.4.4. Motion Zone selection screen
) and change the value of the menu item using the control button (
Figure 2.5.1. STORAGE setup screen
Table 2.5.1. Menu items in STORAGE Setup screen
When enabled, the DVR will continue recording and overwrite the
oldest existing recorded data once the hard drive is full. When
disabled, recording will stop once the hard drive is full.
You will have an option YES or NO for the hard drive format.
Caution:
We recommend that you archive any data that you may need in
the future before you format the hard drive.
Description
30