Trane Master Scheduler Owner's Manual page 25

S
YSTEM
S -
ET UP
2 3
• Press HEAT/COOL again to calibrate the
zones' indoor temperature readings.
Indoor temperature calibration is best
left to professionals. But if you and your
independent thermometer say the
Master Scheduler is off and you really
want to change it yourself, use the
ARROW keys to change the calibration
of the indoor temperature sensor. You're
in this mode when the letters CA L
appear.
• Press HEAT/COOL again to move to
the last set-up and you'll be able to
specify the zones of your Integrated
Zone TM System the Master Scheduler
will schedule.
• Press ZONE to change to each zone.
SYSTEM SET-UP
Zone
SYSTEM SET-UP
Zone
SYSTEM SET-UP
Zone