System Set-Up - Trane Master Scheduler Owner's Manual

S
YSTEM
S -
ET UP
Here's something you need to know:
When you change this setting, all of the
setpoints and setbacks you scheduled so
carefully will revert to factory settings.
2 2
• Press HEAT/COOL again to initiate the
next Set-Up which enables you to
change from Fahrenheit to Celsius.
When the word Temp comes up under
the clock, press the ARROW keys to
choose between F and C.
• Press HEAT/COOL again and you'll
see Addr for the zone address. This
will allow you to set the zone
address for the Master Scheduler
(the zone whose temperature the
Master Scheduler will measure and
control).
• Use the arrow keys to change to the
appropriate zone. Leave at 0 (zero) if
the Master Scheduler is used only to
schedule other zones.

SYSTEM SET-UP

Temp
SYSTEM SET-UP