Trane Master Scheduler Owner's Manual page 12

B
ASIC A
P :
ROCEDURES
T
EMPERATURE
1 0
Matter Of Degrees.
• To check the outdoor temperature,
press OUTDOOR TEMP. The outdoor
temperature ranges from - 20°F to
120° F.(Note: If the outdoor sensor
is not installed, the outdoor
temperature displayed on the
thermostat will be -13°F or lower)
Press OUTDOOR TEMP again or
EXIT to return to the normal LCD
display. Or wait a minute, and the
normal LCD display will return on
its own.
• Setpoints are the heating and
cooling temperatures you prefer.
Press either ARROW once to see the
setpoint of the current mode
(cooling or heating). They are
displayed by the set of flashing
numbers on the left, next to the
words Set Pt. The actual indoor
temperature is indicated on the right.
Press the HEAT/COOL button to
toggle between heating and cooling
setpoints. Press EXIT when you've
seen enough.
To change setpoints temporarily, see
pages 16-17.
Outdoor Temp
Zone
Temp
Cool
Set Pt