Trane Master Scheduler Owner's Manual page 15

S
ETBACK
P :
ROGRAMMING
S
CHEDULING
1 3
• Press TIME/TEMP again to reach or
change the Heat setpoint; set it with
the ARROWS. Follow the same
procedure for your Cool setpoint.
Note: The Cooling setpoint will always be at
least four degrees higher than the Heating
setpoint. If one setpoint infringes on the required
four-degree separation, the Master Scheduler will
automatically adjust the other to maintain the
difference.
• Press PERIOD to advance to the next
setback period. EXIT will return the
LCD's normal display once you've
scheduled all setpoints.
Congratulations! You've mastered the most
important element of your Master Scheduler.
Ready to move on?
SCHEDULE
M-F M-F Sat Sat Sun Sun
P1 P2 P1 P2 P1
AM
Zone
Heat Cool
Midnt Noon Midnt
P1
P2
SCHEDULE
M-F M-F Sat Sat Sun Sun
P1 P2 P1 P2 P1
AM
Zone
Heat
Midnt Noon Midnt
P1
P2
P2
P2