Trane Master Scheduler Owner's Manual page 20

O : H
VERRIDES OLD
S
ETPOINT
1 8
H
old that Temperature.
Say you're going on vacation. Maybe you have
picky houseguests. Or you're keeping unusual
hours. For whatever reason, you want the Master
Scheduler to maintain a constant temperature in a
zone, but you don't want to reschedule all the
setback temperatures you entered earlier. Here's
how to HOLD that constant temperature.
• Press either ARROW to display and
change the setpoint to a new
temperature. Then press HOLD SET
POINT to lock in your new selection.
That's where it will stay until you tell it
otherwise.
• Press EXIT to return the LCD to its
normal display. HOLD should now
be blinking.
• To cancel HOLD and return to your
original schedule, press EXIT or
HOLD SET POINT.
The "HOLD SET POINT" command will
stay in effect until you cancel it.
Zone
Temp
Cool
Temporary Temporary
Set Pt Set Pt
M-F
P1
Zone
Tue
Cool
Hold
AM