User Guide: PTP 600 Series
Table 6-14 Manual clock attributes
Attribute
SNTP State
Set Time
Set Date
Time Zone
Daylight Saving
Setting the real-time clock to synchronize using SNTP
To set the clock to synchronize with a networked time server, proceed as follows:
Procedure 6-33 Set the real-time clock using SNTP
Select menu option Management, Time. The Time Configuration page is
1
displayed.
2
Set the SNTP State attribute to Enabled. The SNTP clock attributes are
displayed
3
Review and update the SNTP clock attributes
Select Submit Updated Configuration.
4
Figure 6-47 Time Configuration page (SNTP enabled)
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
'Disabled' means that the PTP 600 will keep time without
connecting to a networked time server.
Set hours, minutes and seconds.
Set year, month and day.
Set the time zone offset from Greenwich Mean Time (GMT).
'Disabled' means that daylight saving adjustments will not be
applied to the time. 'Enabled' means that daylight saving
adjustments will be applied, according to local rules.
(Figure
6-47).
Task 11: Connect link to the network
Meaning
(Table
6-15).
6-85