User Guide: PTP 600 Series
The Facility attribute has numeric values as follows:
•
0: Kernel messages
•
4: Security/authorization messages
The Severity attribute has numeric values as follows:
•
1: Alert: Action must be taken immediately
•
3: Error: Error conditions
•
4: Warning: Warning conditions
•
6: Info: Informational messages
Table 4-61 Local log messages
Facility
Kernel
Kernel
Kernel
Table 4-62 Standard log messages
Facility
Kernel
Kernel
Kernel
Table 4-63 SNMPv3 messages
Facility
Kernel
Security
Security
Security
Security
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Severity
Message content (process tag; message text)
Warning
log_full; Syslog local flash log is 90% full
Warning
log_wrap; Syslog local flash log has wrapped
Warning
log_control; Syslog local flash log [enabled|disabled]
Severity
Message content (process tag; message text)
Info
cold_start; PTP wireless bridge has reinitialized,
reason=[Reset reason]
Info
link_up; Wireless link up
Error
link_down; Wireless link down
Severity
Message content (process tag; message text)
Alert
snmpv3_auth; Authentication failure
Warning
snmpv3_asn1; ASN.1 parse error
Warning
snmpv3_engine_id; Unknown engine ID
Warning
snmpv3_sec_level; Unknown security level
Warning
snmpv3_decryption; Decryption failure
System management data
4-83